Intel HD Graphics 4400 Vista driver
Im seeking Win Vista driver for Intel Iris HD Graphic 4400. I know that this Windows is not supported, but is there some solutions? Thank you!
View ArticleIssues with i2c on Galileo gen2 board
I have been trying to connect OV7670 to my galileo gen2 board but am unable to detect the device using i2c scanner arduino sketch or using a custom linux program. Is someone able to use i2c port on...
View ArticleRe: HD Graphics 4400, No HDMI output
Hello Sylvia I did try with other suggestion and non of them really worked for me, below are options which I tried: Yes, done the device manager - device driver disable - device driver enable. Did not...
View ArticleRe: Official Black-screen thread - We need your help!
My PC has the same problem,Are you willing to send your system to us? (Yes/No) NoIs your system a laptop or desktop? DesktopIf desktop, is it custom built, or manufactured?...
View ArticleRe: Problems with "Intel PRO/1000 PT Dual Port Server Adapter"...
All the power savers are disabled, the version of the intel proset is 16.3.48.0 and the driver version is 9.13.41.0, there are much more newer drivers but only for windows 7 and they wont install on xp..!
View ArticleRe: Wireless card stops working after hibernate with 17.1.0.0
Well, this is strange. Originally, I had downloaded and installed the Wireless_17.1.0_s64 Intel PROSet/Wireless WiFi Software (includes Drivers) I removed everything after my hibernate problem and...
View ArticleRe: Build Intel Edison Yocto Image From Scratch
Excellent! I have done the same and I now have a Yocto dev environment that I can use to customize the Linux side of the Edison. Thanks!
View ArticlePower options for Edison mini-breakout board
Hello everyone, I'm waiting for my Edison Board + Mini Breakout to be delivered and I was wondering how I'm supposed to power it. As far as I understood, I can either apply 7-15V on J21 or use the USB...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
Thanks for the reply's. I've tried looking around on my router settings but no luck. I'm unaware of whitelist to be part of my laptop but, I'll contact Dell and see it is.
View ArticleClik here to view.
Re: How to get I2C commo using Edison Arduino breakout board?
Thanks, I got the I2C to "work" using A4/A5. Not sure why SDA/SCL on the digital pin jumper doesn't work. I can read the I2C address of the sensor most of the time, but often it still reports no I2C...
View ArticleIntel HD Graphics 4000 - won't update driver
check out this screenshot. http://i.imgur.com/t4vBTn0.png I am convinced i'm downloading the correct driver. Please help. The auto-detect in Windows fails, actually fails with multiple if not all...
View ArticleRe: Yocto Linux start problems
J13 is for thermistor input into the lipo battery charging circuit. The default position (aka thermistor is not connected) is to have pins 2 & 3 shorted together via the jumper. In which J13 jumper...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
Littlemic I think it must be a compatibility issue between the Intel controller and Seagate external drives. My Chipset is Z97 but Gigabyte uses the Intel controller version 3.0.0.16 and it works for...
View ArticleRe: I bought an Asus laptop with intel i3 and it FPS for some reason droped
Im currently updating 3d video controller for intel i3/64 bit win 8, is dat good?
View ArticleRe: Let's make pps_gpio work on Quark/Galileo
gigneil gigneil, LDiego_Int Good news, after working on this for a while, I finally got a breakthrough and I'm now able to get a PPS GPIO interrupt working in connecting an Adafruit Ultimate GPS logger...
View ArticleGot GPS PPS GPIO interrupts working correctly on Galileo Gen2 board :-)
Fellow Galileo Makers, I got a breakthrough today and was able to get PPS GPIO interrupts working with a Galileo by doing some minor Galileo kernel modifications to the Galileo Gen2 plaftorm driver...
View ArticleRe: Yocto Linux start problems
In default position pin 2 and 3. DS3 Led is on. In the other position it seems work well but DS3 Led is intermitent..In both positions j2 have 0.6 volts. I´ve checked partitions and i found this...
View ArticleRe: Issues with i2c on Galileo gen2 board
I tried the same camera module using Arduino uno and i2s scanner sketch was able to detect the device at slave address 0x21.
View ArticleRe: Intel AC7260 limited access after sleep
joe_intel: It appears that philsward found a very simple configuration fix to this problem as described in the following post: https://communities.intel.com/message/253403#253403 I've been running on...
View ArticleClik here to view.
Re: Is there any gps breakout board or shield that work with intel galileo ?
kabaryFYI for my Fellow Galileo Makers, I'm using the Adafruit Ultimate GPS logger shield for GPS v3 on a Galileo GEN2 board and it works for me OK. To get the NMEA messages, you do have to make a...
View Article