Re: Trouble performing SPI read.
Hi Sergio,I will check those links out. I have actually disabled the SPIDEV module, that is connected to SPI 1 on galileo and in place of that I have included the AD7606. Is that proper?Do I need to...
View ArticleRe: Wifi connection error
Oct 30 13:46:04 edison wpa_cli[263]: Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory Your log showed there was no wlan0 device driver loaded. Trouble shooting wifi...
View ArticleRe: Problem with Linux on Galileo
Hi, Have you guys already tried by updating the latest firmware? There is a new one that you might want to try. Also how are you entering into the Linux console? Serial console cable or with a sketch...
View ArticleRe: Intel® Wireless-N 7260 - slows
It's very unfortunate, because it's the only 14" laptop in that price range that meet my requirements. I think that not only mine, but all Vostro 5470's are cursed - I've read dozens of similar topics...
View ArticleClik here to view.
Intel Rapid Story Technology Driver Failing to Install
I have just done a fresh reinstall of Windows 7 SP1 64bit and when I install the Intel RST driver I am met with an error. I have inserted an image below. And yes I have installed .NET FX 4.5.1 My PC...
View ArticleClik here to view.
Cannot Install Intel HD Graphics on Windows Technical Preview
I tried to Download the Drivers for my laptop through Windows Update, and here, it fails.Downloading it on Windows Technical Preview, but I get an error code:It installed on Windows 8.1, but Windows...
View ArticleRe: Cannot Install Intel HD Graphics on Windows Technical Preview
This is the correct behavior. There are no video drivers released for Windows 10 preview at this time. The only drivers available are the inbox drivers. Doc.
View ArticleClik here to view.
Re: Using The SPI Port Without the mraa Library Problems
I gave that code a run and I too see that there is only one byte being chucked out. ( In my pic I have MOSI and MISO in a loop for fun(?))Whilst on the Raspberry Pi, it does indeed work fine This...
View ArticleRe: Problem with Pocket Pc
Hi Swigert, I apologize for the delay in my response, I think I understand now. Currently the Bluetooth is a little limited, but in the new software release we will have some more Bluetooth features...
View ArticleClik here to view.
Re: digitalWrite and MRAA digitalWrite
My guess is maybe the signals are floating with no load... I may try again with same program and turn on try to trace the analog values of these pins. Could also try with older Logic 16 to see if any...
View ArticleSources for /dev/spidev5.1 and what it calls
As I have mentioned in a few other threads, I am trying to understand how the SPIDEV driver works as to understand it's performance and feature set. Some of the things I would like to understand...
View ArticleInstall ROS Indigo on Edison?
Has anyone tried and hopefully succeeded on installing ROS on an Edison? On Yocto? Or on Debian? I am assuming probably only Base (Bare Bones)... Thanks
View ArticleTask Manager not showing all cores?
Hi Pros. I have Fujitsu RX200 S6 servers, which are Xeon 5500/5600 compatible. Up to today, I had dual X55nn (not sure of exact model) installed. Windows Task Manager was showing 24 separate graphs....
View ArticleRe: Galileo gen 2 broken
I have same problem. I couldn't find OC's meaning. I remember that the red right turn on after aduino IDE disappear(not exactly). I always plugged power first, then USB.
View ArticleUSING A GY80 IMU WITH THE EDISON ARDUINO BOARD
I'm new to the Edison and would like to use my GY80 IMU with it. I had it working fine on my Arduino. I'm not sure where to or what libraries I need.I would like to get the ADXL345 going. I tried just...
View ArticleRe: Trouble getting started with Edison and the Mini breakout board
Hi Sergio, Thanks for checking up on this! I still need to try one last thing and that's the recovery using the dfu-util and xfstk, but I haven't had time to set up a linux machine yet. I have a...
View ArticleRe: Sources for /dev/spidev5.1 and what it calls
Something else is weird as well. If you lower the speed to low then it all of a sudden jumps off the rails to some very high freq. At the time i did not measure this, but saw it on the scope.
View ArticleRe: What is the meaing that OC Led light on?
Thank you for your kindness.I Hope you to solve this problem. Regards,JaeHun
View Articlehow to bind gip pins to led subsystem?
I'm familiar with how to do this before and with devicetree. The edison seems to be different than the arm setups I'm used to. Is there any userland way of binding certain gpio pins to the...
View ArticleClik here to view.
Re: UVC Driver Support
Alex, Thank you.UVC appeared on menuconfig.It seems very basic thing, sorry.
View Article