Clik here to view.
Re: Gadget Driver stops working after a few seconds (ubilinux)
My personal suggestion is to configure wifi and ssh into the console over wlan. For console over usb, I'd use a serial UART tty connection.
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
I don't have the Arduino, but I believe there's a switch to select the USB mode of the USB OTG port of Edison. Anyway, here are some more info. How do we use the host USB port? (check out this...
View ArticleRe: Serial I/O on J3 not responding
Deium, When I hook up Edison to PC, I use both J16 and J3 with two USB cables to PC. So, before the MX20DX256 tes,this two-usb-cable-to-PC was working just fine. After, the test ( test used J21 with...
View ArticleRe: Intel® NUC Kits D54250WYKH BIOS settings and Overclocking
I will try to answer your questions: 1 – In this case you probably mean internal devices. You may want to check the following lists:Intel® NUC Boards and Kits — Tested PeripheralsIntel® NUC Boards and...
View ArticleI have a dx48bt2, and i bought a new videocard gt630. And computer don't work...
I have a dx48bt2, and i bought a new videocard gt630. And computer don't work with this card. Error 5A. How can i fix it?
View ArticleRe: Serial I/O on J3 not responding
hk101, I do not have a loopback test to offer at the moment, however, since J16 is otg it requires a special cable.Either a microUSB A cable that complies to otg or a microUSB B cable with pins 1 &...
View Article29/59 Bug on WMC with Intel 4600 Graphics
Is there a way to at least improve the jumpy video with the 29/59 bug in Windows Media Center 7? I have turned off Film Mode Enhancement and Contrast Enhancement in Advanced and Skin Tone Enhancement...
View ArticleRe: Serial I/O on J3 not responding
Deium, I used microusb B cable for MK20DX test. Did not make much difference. I have used J21 with correct polarity even before my USB to USB test...so that is not the issue.. I think I have busted the...
View ArticleRe: Serial I/O on J3 not responding
hk101, I am okay with the cable and power via J21. I don't have a program to test a FT232R,if it is possible to write this using c, gcc is installed on the Edison module. I wish I had more to offer...
View ArticleClik here to view.
Re: SDK installation and Eclipse Integration?
yongpingWhat is the full path you are providing in the toolchain and sysroot locations?This should be the full path to the location where you installed the SDK which the default is:Toolchain:...
View ArticleRe: Alsa on edison
Okay, that was a typo on my part - it was just too long ago I used that It should've been "hw:1,0" actually. I've wrote a blog post on enabling the sound, check it out:...
View ArticleRe: Does Edison support Audio and Video?
Yes, I was able to make it work. It turned out the recipe I used initially was configuring the package to use pulseaudio, so it wasn't really flying with ALSA. I've rebuilt it with ALSA and SSE support...
View ArticleHow to play audio on Edison - instructions
Responding to several threads on the matter I realized it's worth summarizing the steps necessary to enable audio playback on Edison, so I went ahead and created a blog post:...
View ArticleRe: Does Edison support Audio and Video?
Do I have to update ALSA and mpg123 that you rebuilt? How do I update them?
View ArticleHard drive recommendation request for nuc 2820
Hello in my junk yard of pc part I have a 50GB SSD and a 250GB HDD. So I am wondering which would be better for my nuc 2820. I will be putting 2gb of ram in this system as well. Any help on this will...
View ArticleRe: Galileo TFT LCD Installation
Hello DiegoV_Intel, I apologize for the delay, been super busy at work. Further, with my limited knowledge I am unable to determine a suitable interface to use for this type of project, any help is...
View ArticleRe: Does Edison support Audio and Video?
ALSA - no, mpg123 - yes, running "opkg install --force-reinstall mpg123" will do the trick.
View ArticleGalileo GEN2 support - linux yocto build
Hi, a quick question. I am using a SD card image that I have built from the Galileo BSP I got from the Intel download centre.It is based on meta-clanton-1.0.1, but I can't exactly remember which...
View ArticleRe: Does Edison support Audio and Video?
AlexT, can you check repo? After I ran "opkg install --force-reinstall mpg123", I couldn't even find mpg123 on my Edison. pkg install --force-reinstall mpg123No packages removed.Installing mpg123...
View Article