Re: Forced 1080i in some DX11 games is causing screen flicker.
Hi, did anyone try if it does make a difference to connect the screen through mini displayport? Right now I have a HDMI <-> HDMI cable. If it helps I am ready to buy an adapter mini displayport...
View ArticleRe: dz68bc bios won't flash
Hello all! Help !!!Intel DZ68BC update BIOS error...digi Led only 00(not check 13-20-51-E4-E6... only 00) I need file *.BIN or *.ROM to flash rom bios(file *.BIO not flash) Help me. Thanks all!
View ArticleRe: blink won't blink anything on Gen 2 board?
Hi Ivan, I'm guessing a bit here, but I have a feeling that you are not on the latest version of the IDE (the firmware update shouldn't try a downgrade). I would suggest to try out the latest version...
View ArticleRe: Intel Edison Camera Module
Hi Danny, If it was me, I'd start by looking at USB, and trying with a built in camera from a laptop. They are usually USB and tiny. It might be a bit tricky with drivers, but if you can manage to get...
View ArticleRe: Graphics problem.
Many thanks for this information, its as I thought, I have been sold a HD3000, advertised as a HD4000. The 4000 supports Directx11, higher than the other.
View ArticleIntel DZ68BC error code 00
DZ68BC bios ver 0039 not VGA (beep error vga on). Recovery bios corrupPower on 2digi led only 00... not test 13, 20, 51, E4, E6... How to fix?File *.BIO not flash. Need *.BIN or *.ROM to reflash it....
View ArticleRe: Edison and Arduino IDE connectivity issue
I have exactly the same issue. If I reinstall the IDE arduino-windows-1.0.4.7z, I can load a sketch, but can't load another one later.... OS is Win 7 64
View ArticleRe: DE3815TYKH will not power down
I have try openElec and slackware Linux installed to eMMC. The problem is we cannot shutdown / reboot the Linux O/S using normal procedure (including CTRL+ALT+DEL, shutdown command or reboot command)....
View ArticleClik here to view.
Mobile Intel 4 Series Express Chipset Family to 30 hz
how can i change 60 hertz to 30 hertz ? or where can i get a mod ? or how can create one ? i think this can help with overheating in my Mobile Intel 4 Series Express Chipset for games edit :PNP Generic...
View ArticleClik here to view.
Re: blink won't blink anything on Gen 2 board?
Thank you flummer. We only loaded the software today, but somehow Google led us to a slightly out of date version. I was running 1.5.3 as you thought, and when I followed your link I was able to...
View ArticleRe: Edison and Arduino IDE connectivity issue
Thanks. I figured out how to do the change. Only took around 6 hours to look it all up, then took 10 minutes to make it happen.
View ArticleRe: Audio via I2S on edison
why this board doesn't have enough information at sound "i2s" and how to connect them to output speakersand is there no supporter in INTEL to ask ??!!
View ArticleRe: How best proceed with overheating i7-4790K?
Hey Sampark! i'm glad to hear your new CPU runs better than the last one. I can see you even managed to squeze a little more from it and still keep it in normal temp ranges. here is what the simbols...
View ArticleIntel Edison Arduino failed to upload
Dear All, I tried my first program in intel edison (blinking LED) from Arduino IDE in Ubuntu 14.04. This is failed due to timeout. I have checked my debug serial port and board selection in the IDE...
View ArticleI Am having problem in my raid 5 configuration
Dear All, I am having problem with my raid 5 hard disk, I have 1 500 GB operating System Hard Disk.and 5*2TB Data Hard Disk that is member of Raid 5.In My Client Site 4th hard disk was not working, in...
View ArticleRe: How best proceed with overheating i7-4790K?
sampark1980You said: " I got temperatures in mid 60Cs with a high of 71C with (stock cooler) ". May I ask you a few questions if you don't mind?1- What is the stress test type you have done to get that...
View ArticleYocto build error in nodejs do_install
Dear All, I tried my first build with Yocto and the build failed in nodejs do_install step. If restart the build process without doing any changes, the build success. Please find the attached logs....
View ArticleHello .. I am having problems in intel R Active Mnagment technology.
Hello .. I am having problems in intel R Active Mnagment technology. its showing yellow mark ..please try to solve the problem..
View ArticleRe: How best proceed with overheating i7-4790K?
I had same problems .i used this paste and now i have 77 c at turbo with h 60 watercooler.with stock paste i had 100c.take Prolimatech Thermalpaste PK-3 Nano 1,5gr .
View ArticleClik here to view.
H97M-Plus mobo with I218-V nic trouble
Hi, For Study and home use I build a small computer with the following components:Mobo : Asus Intel 1150 H97M-PlusCPU : Intel Core i3-4150Ram : 2x Kingston HyperX 4GB DDR3 1600 (9-9-9) Blu 2KPSU :...
View Article