Re: Intel Edison Arduino failed to upload
asking the obvious questions: have you selected the right board in Arduino IDE (-> Edison)? have you selected the right COM port?
View ArticleRe: Yocto build error in nodejs do_install
not sure but seems there is an issue with the hash sums of the tarball: SHASUMS.txt defines: "node-v0.10.28.tar.gz":"ef08a75f6359a16e672cae684e0804ca7f4554b7"howevernode-v0.10.28.tar.gz local sha1...
View ArticleRe: Crashlog_00001
yes, it does - have you modified the kernel or added any custom modules?
View ArticleRe: DE3815TYKH will not power down
hello, my last annotation is gone that the new update to the BIOS Version 36 does not work. But I will wait till the next update. greetings Peter
View ArticleRe: Intel Galileo - Can't upload sketch while boot from Big Linux Image
maybe try updating the firmware?
View ArticleRe: Bricked Board
you should see when connecting via serial. If you don't have anything showing up when powering up I'd call it bricked.
View ArticleRe: Intel Galileo IoT dev kit setup issues
have you selected the correct board within Arduino IDE? (-> Galileo Gen1)
View ArticleRe: Intel RST 13.2.4.1000 installation problem
I'm not able to generate such report because after succesfull installatin of RST I do not have an RST GUI there's no icon in a tray, no shortcut in a start menu and in "program files(x86)\intel\Intel...
View ArticleRe: Fail to suspend Edison board - Yocto image ww42
Hello, did you find anything? I only tried to shutdown the specific device via pci000:.... folder but it only makes the kernel to panic. Thanks Pierre
View ArticleClik here to view.
Re: Intel Edison Arduino failed to upload
Dear mhahn, Thanks for your response. Yes, I have double checked that I have selected Edison in Board type and /dev/ttyUSB0 in serial port. Thanks,Parthiban N
View Articlehello, I have a sound problem when I plugged into the port of the speakers...
hello,I havea sound problemwhen Iplugged intothe portof the speakersandthe volume isveryloudI hearnoise.Isthisis adriver issueorhardware?thank you
View ArticleRe: DN2820FYKH No bootable Device
lookherehttp://www.intel.com/support/motherboards/desktop/sb/CS-033935.htm
View ArticleRe: can't build edison image
It's not the only one, but those tested and definitly working are Ubuntu 12.04 and Debian Wheezy, x86_64
View ArticleRe: Reset Password
???? - how can you access the console without knowing the password ????
View ArticleRe: First time flash of Edison breakout board
ok, cool - so pls mark this thread as answered
View ArticleRe: Intel Edison corrupted flash
Yeah, that was exactly what I suspected, thus my question about how long it took - when not run as root it just zaps through really fast without doing anything.
View ArticleRe: UVC Driver Support
Indeed. It's now Edison BSP User Guide_331188-001.pdf, I'll correct my post in a second. Thanks for reporting that!
View ArticleRe: UVC Driver Support
I've built the uvcvideo module. The target for kernel is called linux-yocto, not linux-externalsrc. Or virtual/kernel, which is the same for this purpose. See the BSP build guide for details of...
View ArticleRe: UVC Driver Support
UPDATE11 Nov 2014: The below is no longer applicable, BSP Build Guide was updated since then per my feedback and the command there is correct. Okay, that's a bug in the command example. The text above...
View ArticleClik here to view.
Re: Reset Password
You dont need to know the password. Log in to the putty via the Serial com port #, once shell opens up, hit enter and enter the above command. Then you can follow the prompts to setup the new edison...
View Article